Single Component AM 45

Fast setting Assembly Glue
Characteristics:

Low viscosity
Very short setting time
Gap filling
Good moisture resistance
Bond quality D2 (DIN EN 204)

Fields of application:

Gluding solid wood
Finger – joint bonding

Technical data:
Basic: PVAC dispersion
Coulor: White
Viscosity: 8,500 – 9,000 m Pa.s
Approx: 9,000 mPa.s
PH value: 4 – 6

Instructions for use :

Open time: Approx . 30 minutes
Press time / setting time: 60 minutes
The data shown is base on 7 – 14 % wood moisture
Ensure that the parts to be bonded are close fitting and free from dust and grease.
Usually, application of the glue to one side only is sufficient.

Cleaning:
Equiment used to apply the glue may be cleaned easily using cold or luke – warm
water before the adhesive has dried hard. Hard dried glue remnants have to be removed
mechanically.
Packaging size :

Plastic pail of 20 kgs net, drum 200 kgs net
Tank of 1,200 kgs net

Storage instructions:
Store in original tightly closed container in a cool, dry place away from frost. Stir
well before use. Storage life up to 12 months