Adhesive
Two-Component Adhesive EB-680
17.07.2024

Two-Component Adhesive EB-680

OKDABOND™ EB – 680 combined with EB-HP catalyst is a two-component adhesive specially used for edge gluing hardwoods. This adhesive exhibits excellent water resistance and high heat resistance.

A. PROPERTIES:

Component EB-680 Glue White Catalyst
Appearance Liquid, milky white Brown
Solid Content 47% ± 3% 100%
Viscosity 40 ± 20p 1.5 ± 0.2p
pH Content 7.0 ± 1.0
  • OKDABOND™ / EB – 680 has high adhesive strength, good water resistance, no formaldehyde toxins, and higher heat resistance than PVAC glue.
  • The quality of OKDABOND™ EB – 680 meets the standards of DIN EN 204 Class D4 (European Standard) and JAS (Japanese Standard).

B. USAGE:

Characteristics Technical Specifications
Wood Moisture Content 7 – 14%
Mixing Ratio: Glue / White Catalyst 100/ 15 – 20 (by weight)
Glue Spread Rate 200 – 250 g/cm²
Open Time 2 – 5 minutes
Pressing Time 8 – 15 minutes
Pressing Force 7 – 15 kgf/cm²
Clamp Release Time 30 – 60 minutes
Pot Life 45 minutes at 30℃

Notes:

  • The quality of the bonded joint depends on weather, type of wood, pressing force, length of the panels, etc. Please contact for support.
  • Always tightly seal the catalyst container after use to prevent outside air from entering.
  • Use within 6 months if kept sealed.
  • Wear rubber gloves throughout the working process.
  • Wash with soap and water if the glue gets on skin or clothes.
  • Clean tools immediately after use.

Storage: Store in a cool place, temperature between 5℃ – 30℃, away from direct sunlight.

Packaging:

ADHESIVE:

  • 1200 kg plastic drums
  • 200 kg barrels
  • 30 kg plastic cans

CATALYST:

  • 250 kg barrels
  • 30 kg plastic drums
  • 6 kg cans

Hotline: 0911138382 – 089932076 (Mr. Huân)